Cleaning your carburetor is very simple. The first step to cleaning your carburetor is to pull the top part off. There should only be 4 screws. Second is to un-do your float chamber. This is located by the bottem of the carb and is almost off centerd, you will know this becausse is looks like a little floater or a bouy. Next is to remove float and needel valve. These are both located above the float.
You should make sure that throttle linkage is free and clean as well. Now you will need to remove main jet and needle jet. There both right in between were the floater was. Lastley you will submerge these parts in carb cleaner. Put it all back together will a fresh tank of fuel and your set to jet.
Cleaning your carburetor is very simple. The first step to cleaning your carburetor is to pull the top part off. There should only be 4 screws. Second is to un-do your float chamber. This is located by the bottem of the carb and is almost off centerd, you will know this becausse is looks like a little floater or a bouy. Next is to remove float and needel valve. These are both located above the float. 
No comments:
Post a Comment